How to Setup LAN in Win10 – Kevin@facebook

————- Step by Step ————

1. Go to “Device Manager”, click on “Network Adapter”, click on “Action” and then on “Add legacy hardware”.
2. Click “Next” and pick “Advanced” option and then pick “Network Adapter” from the list and click “Next”.
3. Click on “Have Disk” and click on “Browse” and go to: C:\Program Files\Microvirt\MEmuHyperv.
4. Select “MEmuNetAdp.inf” and click “Open” and “OK”.
5. Click “Next” twice and let it install and then click “Finish”.
6. Go to “Network and Sharing Center” and click on “Change adapter settings”.
7. Select your Ethernet Adapter and the MemuHyperV Host-Only Ethernet Adapter and right-click and pick “Bridge Connections”.
8. Open “MemuHyperv.exe” and go to “Settings -> Network”.
9. Adapter 1 = NAT; Adapter 2 = Host-only Adapter -> Name: MemuHyperv Host-Only Ethernet Adapter
10. Open MEmu and check your IP with ES File Explorer. To check your IP go to Remote Manager and start it.
11. Your IP should be in the same address range as your PC’s IP. If not turn the WiFI from MEmu off and on again and/or disconnect from the WiFi in MEmu and reconnect.